Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Oakland, TN (38060) · Local Professionals

Memphis Metal Roofing · Fast response in Oakland and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Oakland, Tennessee sits just east of Memphis along Highway 64, where new subdivisions and horse properties share the same ZIP code, 38060. The mix here is distinct: brick colonials on cul-de-sacs, smaller ranches on generous lots, and working barns and shops tucked behind white fences. If you drive past Oakland Elementary or the ball fields at the park, you will see metal roofs on everything from porch overhangs to full barns.

We are Memphis Metal Roofing, and we work Oakland every week. Homeowners call us because the same storms that drop limbs on the tall oaks around town also test fasteners and flashing on older shingle roofs. Whether it is a standing seam upgrade on a new build near the high school or a repair on a barn off 64, we know the ground here and we show up when we say we will.

Metal Roofing in Oakland (38060)

Oakland is flat to gently rolling, and that matters for drainage. After a heavy summer storm, water can stand in low spots near property lines and along driveways, so we pay close attention to gutter pitch and downspout placement. The soil here is a mix of clay and loam that shifts with moisture, which can affect how a roof settles over time. On horse properties east of town, barns and shops often use exposed-fastener R-panel or 5V crimp, and those need regular screw checks because the wide temperature swings loosen fasteners. Newer subdivisions closer to the center of Oakland tend to have steeper roofs and tighter lots, so we plan staging carefully to avoid damaging landscaping or blocking neighbors.

Our team has installed and repaired metal roofs across Oakland and the surrounding Memphis area for years. We have worked on standing seam in charcoal and bronze, stone-coated steel that mimics shake, and copper accents over entries. We know which profiles and colors pass local design review and which ones fit the look of the older homes near the community center.

Our services in Oakland

How a Job Works in Oakland

Step 1: You call (901) 437-0104 or request a free on-site assessment. We walk the roof, check the attic if accessible, and look at flashing, fasteners, and gutters. We give you a written estimate the same day or the next, with clear line items and no pressure.

Step 2: Once you approve, we pull the permit with the City of Oakland building department and schedule the work. For tighter lots in the newer subdivisions, we coordinate with your HOA if needed and plan material delivery so it does not block the street. On barns and shops, we work around your schedule and animals. Most standing seam installs take two to four days depending on size and weather.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old materials, use a magnet to pick up screws and nails, and make sure gutters and downspouts are clear. You get a written warranty and a roof that is ready for the next storm.

Pricing in Oakland depends on the job, but here are realistic starting points. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are going over existing shingles, retrofit starts at $7 per square foot, but keep in mind local code limits how many layers you can have. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Stone-coated steel and metal shingles start at $9 per square foot, and copper or specialty metal at $20. Coating and painting starts at $2.50 per square foot. The biggest cost factors are roof size, pitch, access, and how much repair is needed underneath. Call (901) 437-0104 for a free estimate tailored to your property.

My house is in one of the newer subdivisions off Highway 64 near Oakland Elementary. Do I need HOA approval for a standing seam roof?
Many of the newer subdivisions in Oakland have architectural review requirements. We can provide product samples, color chips, and manufacturer specs to submit to your HOA. We recommend getting approval before ordering materials, and we are happy to coordinate with your board.
A storm just took down a limb on my barn roof east of town. Can you come out today?
Yes, we offer free storm and wind damage inspections in Oakland. Call (901) 437-0104 and we will schedule a visit, usually within 24 hours. If it is an active leak, we can tarp it temporarily to prevent further damage.
What does a typical metal roof replacement cost for a 2,000 square foot ranch in Oakland?
For a 2,000 square foot ranch with a simple gable, you can expect a starting range of $16,000 to $22,000 for installation, depending on panel type, pitch, and whether we remove the old shingles. Standing seam will be toward the higher end. We give firm quotes after an on-site measurement.
Do I need a permit from the City of Oakland for a metal roof, and how long does it take?
Yes, a roofing permit is typically required for a full replacement or re-roof in Oakland. The city building department reviews plans and inspects the final work. We handle the paperwork and scheduling. Turnaround varies, but most permits are issued within a week or two.
My neighbor's oak tree drops limbs on my roof, and we are not sure where the property line is. How do you handle that?
We can show you where the roof damage is and document it for your records. We do not get involved in property line disputes, but we can recommend a surveyor if needed. For HOA concerns, we provide documentation of the work and materials for your files.
Are you fully insured for work at my Oakland property?
Yes, we carry general liability and workers' compensation insurance. This protects you if anyone is injured or if there is accidental damage to your property.
What maintenance should I do on my metal roof in Oakland to prevent leaks?
Check fasteners and seals every spring and fall, especially after severe storms. Keep gutters clear of leaves from the oaks and pines common here. Look for loose panels or lifted flashing after high winds. We offer inspection and maintenance plans starting with a free estimate.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm