Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Atoka, TN (38004) · Local Professionals

Memphis Metal Roofing · Fast response in Atoka and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Atoka is a small town just north of Memphis where new subdivisions off Highway 51 sit alongside older homes on larger lots, and the mix of brick ranches and two-story colonials means roofs here take a beating from spring hail and summer sun. If you live near Atoka Elementary or along the 38004 stretch of Main Street, you know how quickly a storm can roll through and leave shingles scattered.

That's why homeowners in Atoka call Memphis Metal Roofing. We know the local housing stock, from the newer builds in Walker Farms to the older homes near the Atoka Park, and we've helped neighbors deal with everything from hail dents to wind-lifted panels. Our team is based in Memphis but we're in Atoka regularly, and we treat every roof like it's on our own street.

Metal Roofing in Atoka (38004)

Atoka sits on relatively flat ground with a mix of sandy loam and clay soils, which can affect drainage around your foundation and the way water runs off your roof. Many homes here have gutters that struggle with heavy spring downpours, and we often recommend gutter upgrades or adjustments when installing a metal roof. The town has seen a lot of new construction in the last two decades, with subdivision lots that are tight on space, so we plan deliveries and staging carefully to avoid blocking neighbors' driveways. Older properties closer to the center of town may have mature trees that drop limbs and leaves, so we check for potential impact damage and suggest solutions like snow guards or heavier gauge panels where needed.

Our team has installed and repaired metal roofs across Atoka and the surrounding areas, from simple corrugated panel roofs on sheds to standing seam systems on custom homes. We understand the local building department's requirements and can help you navigate permits, especially if you're in a neighborhood with design guidelines.

Our services in Atoka

How a Job Works in Atoka

Step 1: Give us a call at (901) 437-0104 or request a free estimate online. We'll schedule a time to come out and inspect your roof, discuss your options, and provide a written quote. We'll also check for any signs of damage that might be covered by insurance.

Step 2: Once you approve the quote, we'll order materials and schedule the work. For most homes in Atoka, a full metal roof installation takes one to three days, depending on the size and complexity. We'll coordinate with your HOA if needed and pull the required permits from the town of Atoka. Our crew is careful with tight lots and will protect your landscaping.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeping for nails, and walk you through the finished roof. We don't leave until you're satisfied and we've answered all your questions.

Metal roofing costs in Atoka vary based on the material, square footage, and complexity of your roof. For a typical 1,500 to 2,000 square foot home, you can expect to pay between $8 and $12 per square foot for a basic corrugated or ribbed panel installation, while standing seam runs $10 to $14 per square foot. A metal roof over existing shingles (retrofit) starts around $7 per square foot and can save you on disposal costs. Repairs for leaks or loose fasteners typically start at $450, and we offer free inspections to assess your needs. Call us at (901) 437-0104 for a free estimate tailored to your home.

My house is near Atoka Elementary and has a steep roof with dormers. Can you install metal roofing without damaging the original character?
Yes, we have experience with steep roofs and dormers. We can use standing seam panels or metal shingles that mimic the look of traditional materials. We'll work with you to choose a profile and color that fits your home's style and any HOA guidelines.
A storm just knocked a tree limb onto my roof and there's a leak. How fast can you respond in Atoka?
We offer emergency repairs and can usually get to you within 24 to 48 hours, depending on the severity. Call us at (901) 437-0104 and we'll prioritize your situation, tarp the area if needed, and schedule a permanent repair.
What's the average cost for a metal roof replacement on a 2,000 square foot house in Atoka?
For a 2,000 square foot home, a full replacement with corrugated panels typically runs $16,000 to $24,000, while standing seam might be $20,000 to $28,000. Factors like roof pitch, number of penetrations, and material choice affect the final price. We provide free estimates so you know exactly what to expect.
Do I need a permit from the town of Atoka for a metal roof installation?
Yes, a building permit is generally required for a roof replacement. We handle the permit application and inspections for you, ensuring the work meets local codes. Requirements can vary, so we always confirm with the Atoka building department before starting.
My neighbor's tree hangs over my property line and drops debris on my roof. Can I trim it or do I need their permission?
In Tennessee, you generally have the right to trim branches that overhang your property line, but it's best to talk to your neighbor first. If the tree is on their property and poses a risk, you may need their consent. We can advise on roof protection and gutter guards to minimize debris issues.
Are you fully insured for work in Atoka?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Atoka's climate?
Inspect your roof annually for loose fasteners or debris, especially after spring storms. Keep gutters clear to prevent water backup. We offer maintenance plans that include inspections and minor repairs to keep your roof in top shape.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm