Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Collierville, TN (38017) · Local Professionals

Memphis Metal Roofing · Fast response in Collierville and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Collierville's historic square and the brick colonials off Poplar Pike and Houston Levee call for roofs that can handle a Mid-South storm season without constant patching. Whether you own a 1990s colonial in a cul-de-sac near Schilling Farms or a cottage near the town square, the right metal roof can outlast the architectural shingles that are common on these streets.

Homeowners in 38017 call Memphis Metal Roofing because we know how Collierville's mix of HOA design rules, tight subdivision lots, and mature oak canopy affects a roofing project. From the first inspection to the final cleanup, we treat your property like it's on our own street.

Metal Roofing in Collierville (38017)

Collierville sits on the eastern edge of Shelby County, where the ground is mostly flat to gently rolling and the lots range from compact cul-de-sac parcels to larger estate tracts near the Wolf River. The dominant housing stock is 1980s to 2020s brick colonials and traditional subdivisions with architectural shingles, plus a smaller pocket of older homes near the historic square. That means most of our work here involves retrofit over existing shingles, standing seam installs on steep gables, and metal shingle roofs that match the colonial look many neighborhoods require. The tall oaks and pines drop limbs and leaves year-round, and the humid summers bake sealants and feed algae on north-facing slopes. Spring storms bring straight-line wind and hail that test every fastener and flashing detail.

Our team has worked across Collierville and the surrounding Memphis area long enough to know which streets have tight access for a dumpster, which HOAs want a specific panel profile, and where the grade needs extra attention for gutter drainage. We pull the right permits and build roofs that shed water the way this climate demands.

Our services in Collierville

How a Job Works in Collierville

Step 1: Call us at (901) 437-0104 or request a free estimate. We schedule an on-site assessment, walk the roof and attic, check flashing, fasteners, and decking, and give you a written scope with pricing. If storm damage is involved, we document the condition for your insurance file.

Step 2: Once you approve, we coordinate the permit with the town and any HOA design review, order materials, and set a start date. On tight subdivision lots we stage materials carefully and protect landscaping. Crews remove the old roofing, inspect and repair decking, then install the new metal system with proper underlayment and flashing. Most residential roofs take a few days depending on size and weather.

Step 3: We magnet-sweep the yard, haul away all debris, and walk the finished roof with you. You get a final inspection and a clean property, with no nails left in the grass or driveway.

Pricing in Collierville depends on roof size, pitch, access, decking condition, and whether we are installing new or retrofitting over shingles. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and retrofit over shingles around $7. Metal shingle and stone-coated steel start around $9 per square foot, while corrugated and ribbed panel runs about $5.50. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Gutters for metal roofs start around $9 per linear foot. Every roof is different, so call (901) 437-0104 for a free, no-pressure estimate tailored to your Collierville home.

Do metal shingle roofs fit the look of Collierville's historic square homes and HOA subdivisions?
Yes. Metal shingles and stone-coated steel come in profiles and colors that resemble slate, shake, or tile, which many Collierville HOAs and historic-area homeowners prefer. We help you pick a panel and finish that meets design guidelines while giving you the durability of metal.
How fast can you respond to storm damage in Collierville?
We prioritize active leaks and wind damage. Call (901) 437-0104 and we will schedule an inspection, usually within a day or two depending on storm volume. We tarp or make temporary repairs if needed and provide documentation for your insurance claim.
What does a typical metal roof cost in Collierville?
Most full installs fall between $8 and $12 per square foot depending on the system, with standing seam and copper at the higher end and corrugated panel at the lower end. Repairs start around $450. Roof size, pitch, access, and decking condition are the main cost drivers.
Do I need a permit for a metal roof in Collierville?
Yes, a roofing permit is commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We handle the permit application and inspections for you. You can also check current requirements on the City of Collierville website or by calling the building department directly.
My HOA requires approval before I change my roof. Can you help with that?
We can provide product specifications, color samples, and installation details for your HOA submittal. Many Collierville subdivisions have design review, so it is best to get approval before ordering materials. We will coordinate the timeline so your project does not stall.
Are you fully insured for work at my Collierville property?
Yes. Memphis Metal Roofing carries general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Collierville's climate?
Keep gutters and valleys clear of leaves from the oaks and pines, check fasteners and sealant every few years, and wash off algae or debris on north-facing slopes. We offer inspections and coating services to extend the life of your roof, especially after heavy spring storms.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm