Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Brighton, TN (38011) · Local Professionals

Memphis Metal Roofing · Fast response in Brighton and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Brighton, Tennessee sits just north of Memphis along Highway 51, where the land flattens out into farm fields and new subdivisions pop up along the old railroad town grid. Homes here range from older farmhouses with low-pitch porch roofs to brand-new brick builds in subdivisions off Highway 14, and they all take a beating from open-sky storms that roll across Tipton County.

That is why folks in Brighton (38011) call Memphis Metal Roofing. We know how wind funnels across the fields and how fast a spring thunderstorm can peel back a shingle or lift a panel. Whether you are near Brighton High School or out on a rural route toward Covington, we are your local metal roofing crew.

Metal Roofing in Brighton (38011)

Brighton is farm-edge country, and that means wide-open exposure. Properties here often sit on larger lots with outbuildings, barns, and shops that need metal roofing, not just the house. The terrain is flat to gently rolling, so drainage is usually more about gutters and downspouts than steep grade, but heavy clay soil can hold water after a downpour. We see a lot of exposed-fastener R-panel on barns and carports, and standing seam or stone-coated steel on newer homes. The wind here is the main event: straight-line gusts and occasional tornado warnings mean fasteners and seams get tested. We also deal with fallen limbs from the oaks and pines that line older properties, and summer heat that bakes sealants and breeds algae on north-facing slopes.

Our team has worked roofs across Brighton and the surrounding Memphis area for years. We understand the local building stock, from older farmhouses that need a retrofit to new construction that needs a clean standing seam install. We pull permits through the proper local building department and make sure the job meets code.

Our services in Brighton

How a Job Works in Brighton

Step 1: You call us at (901) 437-0104 or request a free estimate online. We schedule an on-site assessment at your Brighton property, inspect the roof, check flashing and fasteners, and talk through options. You get a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we order materials and schedule the work. In Brighton, that often means coordinating with the Tipton County building department for permits, and if you are in a subdivision with an HOA, we help you submit the required design approval. Our crew arrives on time, protects your landscaping, and works efficiently. For barns and outbuildings, we plan around farm operations so we do not get in the way.

Step 3: After installation or repair, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your roof ready for the next storm season.

Pricing in Brighton depends on the job. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can cover. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For barns and outbuildings, corrugated and ribbed panel roofing starts at $5.50 per square foot. Stone-coated steel and metal shingles start at $9. Copper and specialty metal start at $20. Coating and painting start at $2.50 per square foot. Flashing and chimney repair start at $600, and gutters for metal roofs start at $9 per linear foot. The final cost depends on roof size, access, condition, and urgency. Call (901) 437-0104 for a free estimate tailored to your Brighton property.

My house is near Brighton High School and has a low-slope porch roof. Can you install metal over it?
Yes, we can. Low-slope porch roofs are common in Brighton, and we often use a standing seam or exposed-fastener panel designed for lower pitches. We will check the existing structure and flashing, and make sure the installation meets code for your roof pitch. We will also verify whether your HOA or the local building department has any restrictions.
A storm just blew through Brighton and lifted some panels on my barn. How fast can you respond?
We prioritize storm damage calls. Call us at (901) 437-0104 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area to prevent further damage, then provide a repair estimate. We document the damage for insurance purposes if needed.
What is a realistic budget for a metal roof on a 1,500-square-foot ranch in Brighton?
For a basic corrugated or ribbed panel roof, you might start around $5.50 per square foot, so roughly $8,250 for materials and labor on 1,500 square feet, but that is a ballpark. Standing seam would be closer to $10 per square foot, or about $15,000. Factors like roof complexity, removal of old shingles, and trim work will affect the final price. We give free estimates so you know exactly what to expect.
Do I need a permit to replace my roof in Brighton?
Yes, roofing permits are commonly required for a full replacement or re-roof in Brighton and Tipton County. Requirements vary, so we always check with the local building department before starting work. We handle the permit application and inspections as part of our service, so you do not have to worry about it.
My neighbor says my new metal roof might cross the property line. What should I do?
Property line issues can be tricky. We recommend having a survey done to confirm the boundary before installation. If you are in an HOA, check the covenants for any setback rules. We can work with you to adjust the design or placement to stay within your property. We are happy to coordinate with your neighbor and the HOA if needed.
Are you fully insured for roofing work in Brighton?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the job.
How often should I have my metal roof inspected in Brighton?
We recommend an inspection every two to three years, and after any major storm. Brighton's hot summers and strong winds can loosen fasteners and degrade sealants over time. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections, so call us at (901) 437-0104 to schedule one.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm