Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Lakeland, TN (38002) · Local Professionals

Memphis Metal Roofing · Fast response in Lakeland and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lakeland, Tennessee, is the kind of place where a brick house on a big lot can sit a stone's throw from a workshop or a barn, and that mix is exactly what we see when we pull up to a job. Most of the homes here in 38002 were built in the last thirty or forty years, so plenty of original shingle roofs are hitting the end of their service life right about now.

When homeowners around Lakeland start asking about metal, they call Memphis Metal Roofing because we know the difference between a straightforward ranch re-roof and a complex retrofit over an existing shingle layer. Whether you are near Lakeland City Hall or closer to the Canada Road interchange, we can give you a straight answer on what your roof actually needs.

Metal Roofing in Lakeland (38002)

Lakeland is mostly flat to gently rolling ground with large residential lots, and that shapes how we work. Many properties here have long driveways and plenty of yard space, which makes staging materials and equipment easier than in tighter Memphis neighborhoods. But the soil is heavy clay that holds water after a storm, so we pay close attention to grading around the foundation and to how runoff leaves the roof. A lot of these homes have mature oaks and pines close to the house, which means leaf debris, fallen limbs, and the occasional algae streak are common concerns. We also see a fair number of detached workshops and garages, and those often call for exposed-fastener panels rather than standing seam.

Our team has been installing, repairing, and replacing metal roofs across the Memphis area for years, and Lakeland is a regular part of our service route. We know which subdivisions have HOA design rules, which streets have tighter lot lines, and how to work around the schedules of local building inspectors.

Our services in Lakeland

How a Job Works in Lakeland

Step 1: You call us at (901) 437-0104 or request a free estimate online. We schedule an on-site assessment at your convenience, walk the roof, check the decking and flashing, and talk through your options. You get a written estimate with no pressure and no surprises.

Step 2: Once you approve the scope, we pull the required roofing permit through the local building department and coordinate any HOA approvals if your subdivision requires them. On installation day, our crew protects your landscaping, stages materials efficiently on your lot, and works methodically. If your home has a steep pitch or complicated dormers, we plan extra time for safety and detail work.

Step 3: When the job is done, we clean up thoroughly, haul away old materials, and walk the finished roof with you. We do not leave until you are satisfied and understand the care and warranty details.

Pricing in Lakeland depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from about $10 per square foot, and a full replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts near $7 per square foot, though local code limits how many layers you can cover. Repairs and leak fixes typically start around $450, and screw replacement or re-fastening starts around $750. Coating and painting is the most budget-friendly option at about $2.50 per square foot. For a precise number on your Lakeland home, call (901) 437-0104 for a free estimate.

My Lakeland house has a low-slope porch roof and a steep main roof. Can you handle both with metal?
Yes. Low-slope porch roofs often need a different panel profile or a standing seam with a taller seam to shed water properly, while the steep main roof can take standard panels or shingles. We measure the pitch on every section and recommend the right product for each, so you get a watertight result that looks consistent.
A storm just blew through Lakeland and I think some panels lifted. How fast can you get out?
We prioritize storm and wind damage calls in Lakeland and the surrounding area. Call (901) 437-0104 and we will schedule an inspection as quickly as possible, often within a day or two depending on demand. We document the damage for your insurance claim and make temporary repairs if needed to prevent further water intrusion.
What does a typical metal roof replacement cost for a 2,000-square-foot home in Lakeland?
For a home that size, most replacements fall in the range of $18,000 to $26,000 depending on the panel type, roof complexity, and whether we need to replace decking. Standing seam is at the higher end, while corrugated or ribbed panels are more economical. We give you a firm quote after inspecting your roof, not a guess over the phone.
Do I need a permit to replace my roof in Lakeland, and who handles it?
Yes, the City of Lakeland requires a permit for a full roof replacement, and the rules can vary for retrofits over existing shingles. We handle the permit application and coordinate the inspection as part of your project. We always confirm current requirements with the local building department before any work begins.
My HOA has rules about roof color and style. Can you help with approval?
We work with HOAs in Lakeland regularly. We can provide product specifications, color samples, and installation details for your architectural review committee. If there is a question about property lines or setbacks, we recommend having a survey done, and we will position the work to respect your neighbor's property.
Are you fully insured for work on my Lakeland property?
Yes. Memphis Metal Roofing carries general liability insurance and workers' compensation coverage for every crew member on your job.
What maintenance does a metal roof need in Lakeland's climate?
Lakeland's humid summers and occasional ice storms mean you should check fasteners and seals every couple of years, keep gutters clear of leaves from those big oaks, and look for any lifted panels after a windstorm. A periodic inspection catches small issues before they become leaks. We offer free roof inspections to help you stay ahead of problems.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm