Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Munford, TN (38058) · Local Professionals

Memphis Metal Roofing · Fast response in Munford and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Munford is a small town where ranch homes sit on generous lots, farms and workshops dot the open country north of Memphis, and the sound of a truck on Highway 51 is about as busy as it gets. If your roof is showing its age, we install, repair, and replace metal roofs built for this exact mix of wide-open wind and summer heat.

Homeowners in Munford (38058) call Memphis Metal Roofing because we understand the local building stock: simple gable ranches, metal barns, and the occasional older farmhouse that needs a roof that can take a beating from storms rolling across the flatlands.

Metal Roofing in Munford (38058)

Munford sits in the rolling farmland north of Memphis, where lots are wide, driveways are long, and the wind has nothing to slow it down. Most homes here are single-story ranches and farmhouses, often with attached shops or barns that need the same durable metal roofing. The soil is a mix of loam and clay that shifts with the seasons, so proper flashing and fastening at the eaves and penetrations matters more than on a city lot with tight grading. We see a lot of exposed-fastener R-panel on outbuildings and 5V crimp on older porch roofs, and we know how to match those profiles when it is time to repair or replace. The open country means straight-line winds and hail hit harder, and the summer sun bakes sealants on any roof that faces south. Our team has worked on properties from the Munford High School area out toward the farms along the Loosahatchie River bottoms, and we know what holds up here.

We have been serving Munford and the surrounding Memphis area for years, and we bring that experience to every job, big or small.

Our services in Munford

How a Job Works in Munford

Step 1: You call us at (901) 437-0104 or request a free estimate online. We schedule a visit to your Munford property, inspect the roof, and talk through your options. We look at the panel type, the condition of the fasteners, and any signs of leaks or storm damage. You get a written estimate with clear pricing before any work starts.

Step 2: Once you approve, we pull the required permits with the City of Munford or Shelby County, depending on your location. We order materials and schedule the work. On farm properties and larger lots, we can stage materials near the barn or shop to keep your driveway clear. For homes in town, we coordinate with any HOA or historic district requirements if they apply. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption.

Step 3: After the roof is installed or repaired, we do a full cleanup, haul away old materials, and walk the property with you to make sure you are satisfied. We leave your place clean and your roof ready for the next storm.

Pricing for metal roofing in Munford depends on the size of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is a popular choice for barns and workshops. We also offer free inspections and estimates for storm damage and commercial projects. Call (901) 437-0104 to get a precise quote for your Munford property.

My ranch home near Munford High School has an old shingle roof. Can you install metal over it?
Yes, we offer metal roof over shingles (retrofit) starting at $7 per square foot. We first inspect the existing shingles and decking to make sure they can support the new metal roof. If the shingles are too worn or there are multiple layers, we may recommend a full tear-off and replacement. We will give you an honest assessment during your free estimate.
A storm just blew some panels off my barn off Highway 51. How fast can you respond?
We prioritize storm damage repairs and offer free inspections for storm and wind damage. Call us at (901) 437-0104, and we will schedule a visit as soon as possible, often within a day or two depending on demand. We can secure the roof temporarily if needed and provide a full repair estimate.
What does a metal roof cost for a typical Munford farmhouse?
For a farmhouse with a roof around 2,000 square feet, you can expect starting prices from $8 per square foot for basic installation, or around $10 per square foot for standing seam. The final cost depends on roof complexity, panel type, and whether any decking repairs are needed. We provide free estimates so you know exactly what to expect.
Do I need a permit for a metal roof replacement in Munford?
Yes, roofing permits are commonly required for a full replacement or re-roof. The City of Munford and Shelby County have their own permit thresholds and inspection requirements, so we always check with the local building department before starting work. We handle the permit application for you to make sure everything is done correctly.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues. What should I do?
We design the roof and gutters to direct water away from your foundation and away from the property line. If there is an HOA, we can help you get approval for the panel profile and color. We also recommend checking your property survey to confirm setbacks. Our team can walk the property with you and address any concerns before installation.
Are you fully insured for work on my Munford property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the project.
What maintenance does a metal roof need in Munford's climate?
In Munford, the main issues are summer heat, wind-driven rain, and occasional hail. We recommend an annual inspection to check fasteners, sealant, and flashing, especially after storm season. Cleaning gutters and removing debris from valleys helps prevent leaks. We offer maintenance plans and free inspections to keep your roof in good shape.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm