Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Gallaway, TN (38036) · Local Professionals

Memphis Metal Roofing · Fast response in Gallaway and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gallaway is a small, quiet town just northeast of Memphis where the lots open up, the driveways are long, and a lot of homes and outbuildings still wear the original shingle roof from decades ago. If you live out here off Highway 70 or near the old railroad line, you know the wind comes across those open fields with nothing to stop it.

Homeowners in 38036 call Memphis Metal Roofing because we understand how that wind and the summer storms treat older roofs. We have replaced and repaired metal roofs on farm shops, ranch homes, and rural properties all around Gallaway, and we know what fails first when the weather turns.

Metal Roofing in Gallaway (38036)

Gallaway sits on flat to gently rolling ground with a mix of small older homes, brick ranches, and working farm buildings. The soil here holds water after a heavy rain, so gutters and downspouts need to move water away from the foundation, not just off the roof. Many properties have long gravel or dirt drives, which means we plan material drops and equipment access carefully so we do not tear up your yard or get stuck. Older shingle roofs on these homes often have multiple layers, and that matters when we talk about a metal roof over shingles versus a full tear-off. The wind out here is the real story. It gets under lifted shingles and failed fasteners, and once a panel starts to peel, the next storm finishes the job.

Our team has worked on metal roofs across the Memphis area, from standing seam on newer homes to exposed-fastener R-panel on barns and carports. We know the difference between a roof that just looks good and one that is fastened and flashed to handle Gallaway weather.

Our services in Gallaway

How a Job Works in Gallaway

Step 1: You call us at (901) 437-0104 or request a free estimate. We come out to your property in Gallaway, walk the roof and the attic if needed, and look at the flashing, fasteners, and decking. We give you a straight answer on whether a repair will hold or if replacement makes more sense.

Step 2: Once you approve the scope, we schedule the work. On rural lots we confirm where the material truck can park and where we can stage panels without blocking your drive. If your property is in a spot that needs a permit, we pull it and coordinate the inspection. We protect landscaping and outbuildings, and we keep the site as tidy as we can each day.

Step 3: When the job is done, we clean up every nail and scrap, blow off the walks and driveway, and walk the finished roof with you. We do not leave until you have seen the work and know what to expect going forward.

Pricing in Gallaway depends on the size and pitch of your roof, how many layers are already on it, and how accessible the property is. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Exposed-fastener corrugated or ribbed panel roofing starts around $5.50 per square foot, which is often the practical choice for barns, shops, and outbuildings. Repairs and leak calls start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney work starts around $600. We give free estimates, and we will tell you plainly if a repair is the better spend than a replacement.

My barn and shop out on the edge of Gallaway have old corrugated panels that are pulling loose. Can you re-fasten them or do they need to come off?
We see a lot of that on rural properties around Gallaway. If the panels are still sound and the purlins are solid, screw replacement and re-fastening can buy you years, and that work starts around $750. If the panels are rusted through or the wood underneath is soft, we will show you what we find and price a replacement in corrugated or ribbed panel, which starts around $5.50 per square foot.
A storm just peeled back part of my roof and it is leaking. How fast can you get to Gallaway?
Call us at (901) 437-0104. Storm and wind damage calls are a priority, and we offer a free inspection so you know what you are dealing with. We can tarp or make a temporary repair to stop the water, then schedule the permanent fix. Do not wait on a lifted panel, because the next rain will get into the decking and insulation.
What does a metal roof replacement cost for a typical three-bedroom ranch in Gallaway?
Most ranch homes here fall in a range that starts around $9 per square foot for replacement, but the total depends on roof size, pitch, how many old layers need to come off, and whether there is any decking repair. A simple single-story roof is on the lower end. We measure on site and give you a written estimate before any work starts.
Do I need a permit for a metal roof in Gallaway, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the rules and fees are set by the local building department. We confirm what applies to your address before we start and handle the permit and inspection coordination for you. If your home is in a historic or design review area, we check that early too, because it can affect the panel profile and color you are allowed to use.
My neighbor's tree limbs hang over my roof line. What can I do about branches and debris before I put on a new metal roof?
That is a common situation on these older Gallaway lots with big oaks and pines. We cannot trim a neighbor's tree for you, but we can point out where limbs are rubbing or dropping debris onto the roof so you can talk to them. Before installation we clear the roof surface and check the gutters, and we can add gutter guards or adjust downspouts so leaves do not pile up and hold moisture against the panels.
Are you insured for work on my property in Gallaway?
Yes. We are fully insured with general liability and workers' compensation coverage. If you would like proof of insurance before we start, just ask and we will provide it.
What should I check on my metal roof after a Gallaway summer and before winter?
Look for loose screws or fasteners, especially on the windward side of the roof, and check the flashing around chimneys and skylights. Wash off any algae or moss so it does not hold moisture, and make sure gutters and downspouts are clear before the fall leaves drop. A free inspection now can catch a small issue before it becomes a leak. Call (901) 437-0104 to schedule one.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm