Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Millington, TN (38054) · Local Professionals

Memphis Metal Roofing · Fast response in Millington and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Millington is a town of wide lots, open ground, and older ranch homes that take the wind straight on. North of the city, properties stretch out toward the fields and the Naval Support Activity base, and roofs here catch every gust, hailstone, and summer downpour coming across the flat farmland. If you live off Navy Road or near the Millington Municipal Airport, you know how fast a storm can roll in from the west.

That is why homeowners in 38054 call Memphis Metal Roofing. We know the housing stock here, from the brick ranches near Millington Central High School to the newer builds off Singleton Parkway, and we know how to spec a metal roof that handles the wind and sun without constant repairs. Our team is based in Memphis and serves Millington regularly, so we are not guessing about local conditions.

Metal Roofing in Millington (38054)

Millington sits on gently rolling ground with a lot of open space, and that means wind has little to slow it down before it hits your roof. Older ranch homes and rural properties often have simple gable roofs with exposed-fastener panels or worn asphalt shingles that lift in straight-line winds. The soil here is a mix of loam and clay, so drainage around the foundation matters, especially after heavy rain. We see a lot of detached shops, barns, and carports on larger lots, and those metal roofs take a beating from sun and hail. Access can be tight on some of the older streets near downtown Millington, but most properties have enough room for our trucks and equipment.

Our team has worked on metal roofs across Shelby County, from standing seam on brick colonials to R-panel on outbuildings. We understand how Millington's climate, hot, humid summers and spring storms, affects fasteners, sealants, and panel expansion. We bring that experience to every job, whether it is a small repair or a full replacement.

Our services in Millington

How a Job Works in Millington

Step 1: You call us at (901) 437-0104 or request a free estimate online. We schedule an on-site assessment at your Millington property, usually within a few days. We inspect the roof, check the attic if accessible, and talk with you about what you are seeing, leaks, loose panels, or just an aging roof. We then provide a written estimate with options and clear pricing.

Step 2: Once you approve, we pull the required permits from the City of Millington building department. Permit timing varies, so we handle the paperwork and schedule the work. On installation day, our crew arrives with materials and equipment. For tight lots or steep drives, we plan staging carefully. We protect landscaping and keep the site secure. If your home is in an HOA, we coordinate color and profile approvals before ordering materials.

Step 3: After the work is done, we clean the site thoroughly, using magnets to pick up screws and debris. We walk the roof with you, show you the finished work, and explain any maintenance. We do not leave until you are satisfied and your property is clean.

Pricing for metal roofing in Millington depends on the job. For a typical ranch home, metal roof replacement starts around $9 per square foot, while installation on a new build or addition starts at $8 per square foot. Standing seam runs from $10 per square foot, and metal roof over shingles (retrofit) starts at $7 per square foot. Smaller jobs like leak repair start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot. Factors that affect cost include roof size and pitch, accessibility, the condition of the existing roof, and urgency. We provide free estimates so you know exactly what to expect. Call (901) 437-0104 to schedule yours.

My ranch home near Millington Municipal Airport has shingles that keep blowing off in storms. Will a metal roof hold up better?
Yes. Exposed-fastener metal panels and standing seam are both rated for high winds, and they do not lose granules or crack like asphalt shingles. We often recommend a standing seam or R-panel roof for open lots where wind is constant. We will assess your roof and suggest the best option for your home.
A storm just took off part of my metal roof. How fast can you get here?
We prioritize storm damage calls in Millington. Call us at (901) 437-0104, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What does a metal roof replacement cost for a typical three-bedroom ranch in Millington?
For a standard ranch home, replacement typically starts around $9 per square foot, but the total depends on roof size, pitch, and whether we remove the old shingles. Most jobs fall in the $10,000 to $20,000 range. We give you a detailed estimate after inspecting your roof.
Do I need a permit to replace my roof in Millington?
Yes, the City of Millington requires a permit for roof replacements. Requirements and fees vary, so we handle the permit application and inspections for you. We make sure the work meets local code.
My neighbor's tree branches hang over my roof. Can I trim them without permission?
In Tennessee, you generally have the right to trim branches that cross your property line, but you should not damage the tree or trespass. If the tree is healthy and on your neighbor's land, talk to them first. For HOA properties, check your covenants for landscaping rules. We can advise on roof protection and flashing if branches are causing wear.
Are you fully insured for roofing work in Millington?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Millington's climate?
Inspect fasteners and seals annually, especially after storm season. Remove leaves and debris from valleys and gutters to prevent moisture buildup. Touch up scratches to avoid rust. We offer inspection and maintenance services to keep your roof in good shape.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm