Serving the Memphis area  ·  (901) 437-0104  ·  Open Mon-Sun 7am-7pm
📞 (901) 437-0104 Free Quote

Metal Roofing in Germantown, TN (38138) · Local Professionals

Memphis Metal Roofing · Fast response in Germantown and the Memphis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+261Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Germantown's brick colonials and cul-de-sac subdivisions sit under some of the oldest oaks in Shelby County, and those trees drop limbs on architectural shingle roofs every time a storm rolls through. If you live off Germantown Road or near the Germantown Country Club, you know the routine: a nor'easter in July, a pile of sweetgum branches in the yard, and a shingle roof that suddenly has a soft spot. That is where we come in.

Homeowners in 38138 call Memphis Metal Roofing because we understand this housing stock, from the 1980s brick traditional homes near Farmington to the newer builds off Poplar Pike. We install standing seam and stone-coated steel roofs that shed limbs and hail the way shingles cannot, and we repair the leaky ones that have already taken a hit.

Metal Roofing in Germantown (38138)

Germantown sits on the eastern edge of Shelby County, where the terrain is mostly flat but the tree canopy is thick. Lots here are generous, often a third of an acre or more, and many back up to wooded buffers or the greenway. That means mature oaks, pines, and magnolias hang over the roofline, and their limbs are the number one cause of roof damage we see. The soil is heavy clay that holds water after a downpour, so gutters and flashing need to be sized and pitched correctly or you get fascia rot and foundation issues. Access is usually straightforward, but some of the older sections off Germantown Road have narrow driveways and low branches that require careful staging. We plan for that before we ever pull up.

Our team has worked on everything from steep Victorian-era roofs in the older parts of town to low-slope porches on 1970s ranches. We know how to match the charcoal and bronze standing seam profiles that are popular in Germantown's HOA communities, and we can handle the stone-coated steel shake profiles that mimic the look of cedar without the maintenance.

Our services in Germantown

How a Job Works in Germantown

Step 1: You call (901) 437-0104 or fill out our form, and we schedule a free on-site assessment. We walk the roof, check the attic if accessible, and look at the flashing, gutters, and any penetrations. You get a written estimate with options, not a high-pressure sales pitch.

Step 2: Once you approve, we pull the required permits. Roofing permits are commonly required for a full replacement in Germantown, and the rules vary by jurisdiction, so we always confirm with the city before scheduling. If your home is in an HOA, we help you submit the color and profile for approval. Then we get to work, tearing off the old roof (or retrofitting over shingles where code allows) and installing your new metal roof with underlayment, ice and water shield at the eaves, and proper ventilation.

Step 3: We clean up every day, magnet-sweep the yard for nails, and do a final walkthrough with you. We do not leave until you are satisfied and the property is spotless.

Pricing in Germantown depends on the size and pitch of your roof, the condition of the decking, and how much flashing and trim work is needed. For a typical 2,000 square foot ranch, metal roof installation starts around $8 per square foot, standing seam around $10, and stone-coated steel around $9. A metal roof over existing shingles (retrofit) starts at $7 per square foot, which can save on tear-off costs. Repairs for leaks or loose fasteners start at $450, and screw replacement and re-fastening starts at $750. We also offer free inspections and estimates for storm damage. Call (901) 437-0104 to get a real number for your home.

My Germantown home is surrounded by large oaks. Will a metal roof hold up better against falling limbs than my old shingles?
Yes, significantly. A standing seam or stone-coated steel roof will resist punctures from falling branches much better than asphalt shingles. The metal panels flex and absorb impact, and while a very large limb can still cause damage, it is far less likely to punch through. We also recommend trimming back overhanging branches and installing snow guards if you have a steep roof, since ice and debris can slide off in sheets.
A storm just knocked a limb onto my roof in Germantown. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Germantown and the surrounding areas. Call (901) 437-0104 and we will schedule an inspection as soon as possible, often same day or next day depending on volume. We can tarp active leaks and make temporary repairs to prevent further water damage, then provide a full estimate for permanent repairs or replacement.
What does a metal roof cost for a typical Germantown home, and what factors affect the price?
For a 2,500 square foot home with a moderate pitch, you can expect metal roof installation to start around $8 per square foot, so roughly $20,000 for the roof area. Standing seam starts at $10 per square foot, and stone-coated steel at $9. Factors that raise the price include complex roof lines with dormers and valleys, steep pitches, multiple stories, and the need for new decking or extensive flashing work. We provide a detailed free estimate so you know exactly what you are paying for.
Do I need a permit to replace my roof in Germantown, and how do I find out the rules?
Yes, roofing permits are commonly required for a full replacement or re-roof in Germantown. The exact thresholds, fees, and inspection requirements are set by the city, and they can change. We always verify with the local building department before starting work. You can also check the City of Germantown website at https://www.germantown-tn.gov/ for contact information and general guidance. We handle the permit application and inspections as part of our service.
My HOA requires approval for roof color and style. Can you help with that process?
Absolutely. Many Germantown neighborhoods have architectural review committees that must approve roof material and color. We can provide product samples, manufacturer specifications, and color charts to submit with your application. We will coordinate with your HOA to make sure the chosen profile and finish meet their guidelines before we order materials, so there are no surprises.
Are you fully insured for work on my Germantown property?
Yes, we carry both general liability insurance and workers' compensation coverage. This protects you as the homeowner in the unlikely event of an accident or property damage during the project.
What maintenance does a metal roof need in Germantown's climate, and when should I schedule it?
In Germantown's hot, humid summers and stormy springs, we recommend an annual inspection, ideally in early spring before storm season. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of sealant wear. We offer a metal roof inspection starting with a free estimate, and we can perform minor maintenance like tightening screws or replacing sealant to keep your roof in top shape and your warranty valid.
Why choose us?

Trusted professionals in Memphis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Memphis

All your work handled by qualified professionals in Memphis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

261+ Verified Client Reviews in Memphis

⭐⭐⭐⭐⭐ 4.9/5 · 261 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Memphis · Response within 24h · No commitment · ☎ (901) 437-0104

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Memphis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm